Biber Trucks
If you need a lot of power with a long reach, choose an Eschlböck truck. With all-wheel drive, with integrated transfer case, with conveyor belt: we have the right solution for your needs in our program!
Specifi-
cations
- Chipper: Biber Modell
- Axel configuration
- Truck - power unit
- Biber Powertruck transmission
- Driving power
- Cylinder capacity
- Automatic gearbox
- Maximum speed
- Rear axel stearable / liftable
- Wheelbase
- Eschlböck cooling system
- Central lubrication
- hydraulic fan
- TOP conveyor belt
- Spaltbiber
- Weight, app.*
Vican
- 92,110
- 8x4
- Volvo
- ●
- 750 HP/
551 kW - 16 liters
- ●
- 80 km/h
- ● / ●
- 3,7 m
- ●
- ●
- ●
- ○
- ○
- 32.000 kg
Victor
- 84
- 6x4
- Volvo
- ●
- 550 HP/
404 kW - 16 liters
- ●
- 80 km/h
- - / -
- 3,9 m
- ●
- ○
- ○
- -
- ○
- 26.000 kg
Marox
- 84,85,92
- 6x6 /
8x8 - MAN
- ●
- 510 HP/
375 kW - 12,4 liters
- ●
- 80 km/h
- - / -
- 3,9 m /
2,98 m - ●
- ○
- ○
- -
- ○
- 26.000 kg
RBZ
- 83,84
- 6x6
- MAN
- -
- 510 HP/
375 kW - 12,4 liters
- -
- 80 km/h
- - / -
- 3,6 m
- ●
- ○
- -
- -
- ○
- 26.000 kg
* depending on the equipment ● Series ○ additional equipment at extra cost
Videos from Biber Trucks
Efficient
Lots of power and a long reach
BPT technology
The power transmission of the Biber Powertruck technology developed by Eschlböck enables a high power transmission from the truck engine to the chipper with lowest fuel and CO² consumption at the same time.
Automatic transmission
The chipper is driven by a sinlge-stage transmission positioned between the truck engine and the truck automatic transmission. The power is provided directly to the chipper. This saves fuel and the automatic transmission is protected.
Fast and comfortable
The wood chipper can reach the place of use quickly and comfortable with up to 80 km/h travel speed.
Vican
The Biber Power Truck VICAN is equipped with an intermediate gearbox specially developed for the chipping operation and only available from Eschlböck, which is installed between the truck engine and the automatic transmission. This forms the basis for more power, efficiency and comfort in chipping operation: full power reduction without losses due to intermediate drives, a powershift clutch and the chipping rotor does not have to be disengaged for moving the vehicle in driving mode.
The VICAN chassis is a Volvo FH 16 with 750 hp drive power and 3,550 Nm torque. The tridem chassis ensures full utilization of the 32 tons and the Power Truck can therefore be registered without a special permit. An 8x4 drive brings the full engine power from first gear to the first two rear axles. All functions for the chipping operation can be controlled from the operator station. Chipper and crane by means of the Best Control control system from Eschlböck and the two crane joysticks.
The proven Eschlböck cooler concept is also installed in the VICAN: Easy to clean and a constant cooling is guaranteed here. The crane was specially developed by Eschlböck in cooperation with Palfinger Epsilon and assembled from proven components. The S110F 104 has a reach of 10.4 m, which is further extended by the off-center mounting position. This overall concept allows the VICAN to powerfully showcase its 750 hp in every chipping operation.
| Specifications | Vican |
|---|---|
| Chipper: Biber Modell | 92,110 |
| Axel configuration | 8x4 |
| Truck - power unit | Volvo |
| Biber Powertruck transmission | ● |
| Driving power | 750 HP/551 kW |
| Cylinder capacity | 16 liters |
| Automatic gearbox | ● |
| Maximum speed | 80 km/h |
| Rear axel stearable / liftable | ● / ● |
| Wheelbase | 3,7 m |
| Eschlböck cooling system | ● |
| Central lubrication | ● |
| hydraulic fan | ● |
| TOP conveyor belt | ○ |
| Spaltbiber | ○ |
| Weight, app.* | 32.000 kg |
* depending on the equipment
● Series
○ additional equipment at extra cost
Victor
The VICTOR offers compact dimensions with short overhangs and various rear superstructures. At the same time, it offers sufficient power reserves.
professional chipping operation
dynamic – intuitive – powerful
Compact 3-axle chipper
550 hp for superior power development on the road and sufficient power reserves in chipping operation
Driving comfort due to large cabin and air-conditioned comfort seats
Safety at work combined with technical monitoring
Ease of operation thanks to intuitive chipper control and numerous assistance systems
Unique selling point thanks to loss-free power transmission and short design
| Specifications | Victor |
|---|---|
| Chipper: Biber Modell | 84 |
| Axel configuration | 6x4 |
| Truck - power unit | Volvo |
| Biber Powertruck transmission | ● |
| Driving power | 550 HP/404 kW |
| Cylinder capacity | 16 liters |
| Automatic gearbox | ● |
| Maximum speed | 80 km/h |
| Rear axel stearable / liftable | - / - |
| Wheelbase | 3,9 m |
| Eschlböck cooling system | ● |
| Central lubrication | ○ |
| hydraulic fan | ○ |
| TOP conveyor belt | - |
| Spaltbiber | ○ |
| Weight, app.* | 26.000 kg |
* depending on the equipment
● Series
○ additional equipment at extra cost
Marox
MAROX is the new chipper with Biber Powertruck technology based on MAN. The latest model from Eschlböck is equipped with the new EURO 6d engine generation and impresses with its 6x6 axle configuration and off-road capability.
Also important for the operator is driving with automatic transmission. The Biber Powertruck technology installed by Eschlböck enables driving and chipping from the operator’s station and ensures fuel-saving effective energy use in chipping.
| Specifications | Marox |
|---|---|
| Chipper: Biber Modell | 84,84,92 |
| Axel configuration | 6x6 / 8x8 |
| Truck - power unit | MAN |
| Biber Powertruck transmission | ● |
| Driving power | 510 HP/375 kW |
| Cylinder capacity | 12,4 liters |
| Automatic gearbox | ● |
| Maximum speed | 80 km/h |
| Rear axle stearable / liftable | - / - |
| Wheelbase | 3,9 m / 2,98 m |
| Eschlböck cooling system | ● |
| Central lubrication | ○ |
| hydraulic fan | ○ |
| TOP conveyor belt | - |
| Spaltbiber | ○ |
| Weight, app.* | 26.000 kg |
* depending on the equipment
● Series
○ additional equipment at extra cost
RBZ
The RBZ series is a classic from Eschlböck, based on the proven MAN TGS 6x6 chassis with 510 hp. With the quality of the chopped material and its off-road capability – coupled with a compact design – many contractors became leaders in biomass production with an RBZ.
| Specifications | RBZ |
|---|---|
| Chipper: Biber Modell | 84 |
| Axel configuration | 6x6 |
| Truck - power unit | MAN |
| Biber Powertruck transmission | - |
| Driving power | 510 HP/375 kW |
| Cylinder capacity | 12,4 liters |
| Automatic gearbox | - |
| Maximum speed | 80 km/h |
| Rear axle stearable / liftable | - / - |
| Wheelbase | 3,6 m |
| Eschlböck cooling system | ● |
| Central lubrication | ○ |
| hydraulic fan | - |
| TOP conveyor belt | - |
| Spaltbiber | ○ |
| Weight, app.* | 26.000 kg |
* depending on the equipment
● Series
○ additional equipment at extra cost